Softride® springs use only American steel and the individual leafs of each spring are shot-peened with hard steel pellets at very high velocities. This shot-peening compresses the surface of the steel thereby increasing the tensile strength of the spring. Without this shot-peening procedure, the maximum wheel travel and ride quality could not be achieved without sacrificing the life of the spring. Softride® springs use bolt style spring clips, eliminating friction. Other spring designs use the cinch style bend clips which bend tightly over the spring leafs causing binding and friction. Skyjacker® Softride® springs taper over the entire length of the leaf creating more flex at the leaf ends. This tapering distributes loads more evenly over a greater area and reduces the tendency for one leaf to dig into the leaf above it.
This Part Fits:
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1976-1983 | Jeep | CJ5 | Base |
| 1977-1980 | Jeep | CJ5 | Golden Eagle |
| 1980-1983 | Jeep | CJ5 | Laredo |
| 1982-1983 | Jeep | CJ5 | Limited |
| 1976-1983 | Jeep | CJ5 | Renegade |
| 1976-1986 | Jeep | CJ7 | Base |
| 1977-1979 | Jeep | CJ7 | Golden Eagle |
| 1980 | Jeep | CJ7 | Golden Hawk |
| 1980-1983,1985-1986 | Jeep | CJ7 | Laredo |
| 1982-1983 | Jeep | CJ7 | Limited |
| 1976-1986 | Jeep | CJ7 | Renegade |
| 1981-1985 | Jeep | Scrambler | Base |
| 1985 | Jeep | Scrambler | Laredo |
| 1985 | Jeep | Scrambler | Renegade |
| 1982-1983 | Jeep | Scrambler | SL |
| 1982-1984 | Jeep | Scrambler | SR |
- MPN:
- J40FS
